Hydraulic Cylinder Ram

Flowfit Hydraulic Single Acting Cylinder/Ram 25x300x390mm 625/30


Flowfit Hydraulic Single Acting Cylinder/Ram 25x300x390mm 625/30

Flowfit Hydraulic Single Acting Cylinder/Ram 25x300x390mm 625/30    Flowfit Hydraulic Single Acting Cylinder/Ram 25x300x390mm 625/30
Sign Up To Our Newsletter. PTO GEARBOX & PUMP ASSEMBLIES. SLICE VALVES - 1 BSP PORTS. SLICE VALVES - 1/2 BSP PORTS. SLICE VALVES - 3/4 BSP PORTS. SLICE VALVES - 3/8 BSP PORTS.

FLOW CONTROL & DIVIDER VALVES. 2 PUMP HI-LO UNLOADING VALVES.

Double Acting Fixed Pin Holes. BUCHER UP100 AC POWER UNITS.

AC PRESSURE & TANK CIRCUIT. DC PRESSURE & TANK CIRCUIT.

TWO STAGE HI-LOW GEAR PUMPS. TWO STAGE HI-LOW GEAR PUMP KIT.

Flowfit Hydraulic Single Acting Cylinder/Ram 25x300x390mm 625/30. Flowfit Single Acting Hydraulic Cylinder / Ram.

Maximum working pressure: 200 bar. Maximum testing pressure: 300 bar. Maximum working speed: 0.5 m/s. Rod: chrome plated steel F-1140, minimum chrome layer thickness 20 micron, roughness Ra.

Tube: steel ST-52-3, din 2393, inside diameter tolerance ISO H9, roughness Ra. Guide-Bushing: steel F-1140 nitrited (nitride hardening).

Dynamic: compact polyurethane rod-seal, double lip. Static: NBR 90 shore O-ring. Dynamic: compact double-acting polyurethane seal, plus nitrile O-ring as activator. Special polyacetal guides reinforced with glass fibre. Static: polyamide locking sealing guide. Protect the cylinder circuit with a relief valve set at 200 bar. Check the oil cleanness (pollution), and prevent it from having strange objects (place a filter on the cylinder circuit). Bleed the circuit by slightly loosening the cylinder fittings before starting-up. Do not weld on the cylinder tube.

Before welding on the rod or on the bottom, please dismount the cylinder. In case you need to store the cylinders for a long period of time, please avoid outdoor storage.

If not possible, the rod must be completely retracted or it must be greased instead. For high-pressure cleaning or blasting on the cylinder, the rod and the oil-ports must be suitably protected. For double-acting cylinders working as single acting, we recommend to connect the non-used oil-port to tank.

In case you need to dismount the cylinder, please note that the piston is screwed onto the rod end and fixed with industrial glue, so you must use also industrial glue when mounting again. From being expert in hydraulic sourcing in 1996 Flowfit is now a market leader in everything hydraulic, from distribution to systems and manufacturing. Coming from humble beginnings, Flowfits first office was an old Miners home in Cinderford, Gloucestershire, with one employee. Within 6 months Flowfits operations moved to a 400 square foot unit in Ludlow. By 2015 Flowfits facilities had expanded to its current 28500 square foot site, which comprises the head office, shop, engineering and warehouse facilities and, more importantly its employees.

Now in November 2018 Flowfit has started huge new expansion of extra warehousing on its two sites here in Ludlow covering another 8500 on two floors. Flowfits ethos is to provide everything hydraulic for their vast customer base. From parts and systems to bespoke designs, the dedicated and knowledgeable team at Flowfit can meet any hydraulic demand. There is a solution to every problem, and Flowfit has the answer. Whether it be hydraulic cylinders, hydraulic hand pumps, hydraulic motors and pumps or complete bespoke hydraulic systems, Flowfit is an industry leader in the provision of effective, reliable and top quality hydraulic components. We believe the following makes Flowfits offering unique to the industry. Flowfits customers are the lifeblood of the business and the entire structure of, and processes within, the business are designed to ensure they receive the very best customer service. This focus on the customer experience is at the heart of Flowfits success, regarded now as the best in the hydraulic industry.

Key to Flowfits customer service drive and growth trajectory is the vast stockholding in the business, which enables staff to respond swiftly to any and all customer needs. The strength and depth of Flowfits technical expertise ensures customers have a full wrap around care and innovative and cost-effective solutions are always achievable.

Flowfits technical engineers can deliver bespoke, packaged and cost-effective solutions. This is the true growth area of the business and Flowfits capabilities mean that our staff can design, draw and build any hydraulic part or system to suit any customer requirement. As well as manufacturing and supplying a range of high quality products from our own Flowfit Brand, we also work closely with a number of well-known manufacturers within the hydraulic industry to ensure our customers can find the very best solution for their hydraulic requirements. Chief Executive, Simon Parsonage said We work hard every day to make Flowfit the worlds most respected hydraulics company. All of this is aimed at maintaining our position as the best in the industry for customer service. Driving this is a staff who are encouraged to innovate and be the very best they can be. We are proud to be a QMS ISO 9002 Registered Firm.

We are extremely proud after demonstrating that we produce hose assemblies to a standard set by the BFPA, that we have now been awarded the British Fluid Power Associations Seal of Approval for the production of hose assemblies. Please note ISO 9001 2015 is being implemented and should be in place very soon. The British Fluid Power Distributors Association (BFPDA) was formed in 1989 and is dedicated to improving the performance of distribution within the fluid power industry. Flowfit are a proud member of the BFPDA. All orders placed before 4pm will be dispatched that same day.

We use some of the top carrier companies in the world, although you can use your own carrier to collect the order. Below are our main carrier companies.

We are not responsible for any wrong or undeliverable addresses. Your rights to return goods are protected under the Statutory Instrument 2000 No. Parys Road Ludlow Business Park. Sat: 8.00am - 12:30pm Sun: Closed.

You may also be interested in. Flowfit Hydraulic Single Acting Cylinder/Ram 30x400x500mm 630/4.

Flowfit Hydraulic Single Acting Cylinder/Ram 30x300x400mm 630/3. Flowfit Hydraulic Single Acting Cylinder/Ram 30x550x650mm 630/5. Flowfit Hydraulic Single Acting Cylinder/Ram 30x200x300mm 630/2. Flowfit Hydraulic Single Acting Cylinder/Ram 25x100x190mm 625/10.

Flowfit Hydraulic Single Acting Cylinder/Ram 30x700x800mm 630/7. Flowfit Hydraulic Single Acting Cylinder/Ram 25x200x290mm 625/20. Flowfit Hydraulic Single Acting Cylinder/Ram 40x550x680mm 640/5. SIGN UP TO OUR NEWSLETTER. Sign up to receive important updates, news and information.

Flowfit, Parys Road, Ludlow Business Park, Ludlow, Shropshire, SY8 1XY. The item "Flowfit Hydraulic Single Acting Cylinder/Ram 25x300x390mm 625/30" is in sale since Friday, August 16, 2019. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Other Hydraulics & Pneumatics".

The seller is "flowfitonline" and is located in GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  1. Unit uuantity: 1
  2. Closed Centre:: 390mm
  3. MPN: 625/30.
  4. Brand: Flowfit
  5. EAN: 5056463002957
  6. Stroke Length:: 300mm
  7. Rod Size:: 25mm
  8. Item: Cylinder / Ram
  9. Type: Hydraulic


Flowfit Hydraulic Single Acting Cylinder/Ram 25x300x390mm 625/30    Flowfit Hydraulic Single Acting Cylinder/Ram 25x300x390mm 625/30